Maud, was really helpful and her expertise helped in troubleshooting complicated production environment.
Official SOLIDWORKS training courses, online, priced per company.
★ 4.9/51,500+ customersNumber one 3DEXPERIENCE reseller worldwide in 2025
The Cost of a Team That Has Never Been Trained
We pay for the software, but the hours lost don't show up on any invoice. They end up affecting the workshop, support, and deadlines.
Mistakes That Cost Money at the Workshop
An incorrect layout, an incomplete bill of materials, or a handwritten cut list all result in parts having to be remade.
A licence that's only half-used
SOLIDWORKS Premium includes simulation, routing, and advanced sheet metal features. Without training, these modules remain disabled.
Expertise held by a single person
When the CAD specialist is away, the models can no longer be modified. A standard procedure handles this.
Newcomers Learning on the Job
They pick up their neighbour's habits. A formal course makes them self-sufficient faster than a semester of trial and error.
No one leaves the office
Live from France, Belgium, Canada, or elsewhere, as production progresses.
Visible expertise
Certificate of Course Completion and Preparation for the CSWA and CSWP: Your clients can see your level of expertise.
Whatever's going on at your place, this training program has you covered
| What's Going On at Your Place | Training | Duration | Price before tax |
|---|---|---|---|
| Fold patterns created in the workshop, flat patterns redrawn for the laser cutter | Sheet metal work | 2:00 p.m. | On quote |
| Mixed-media drawings, hand-filled title blocks | Drawings | 10 p.m. | On quote |
| Oversized parts, Simulation never opened | Simulation | 10 p.m. | On quote |
| A new artist is starting out, or the team came together on its own | Essentials | 28 hours | CA$3,770 (excluding tax) |
| Slow assemblies, constraints that cause breakage, duplicate variants | Advanced Assemblies | 10 p.m. | On quote |
| Frames designed tube by tube, with hand-drawn cut lists | Welded construction | 12:00 p.m. | CA$1,560 (excluding tax) |
| Stylized shapes that cannot be rendered in 3D, corrupted STEP imports | Surface | 2:00 p.m. | On quote |
| Piping modelled bend by bend | Pipe Routing | 2:00 p.m. | On quote |
26 courses, in the order in which they are taught
Each step builds on the previous one. Choose the one that matches your level, then narrow it down by subject area.
Start
Get familiar with the software, or start over with a clean slate.Essentials
This is for you if: A new artist is starting out, or the team came together on its own
Refresher Course
This is for you if: Self-Taught Team: Frequently Asked Basic Questions for Support
DraftSight
This is for you if: Switching from AutoCAD to DraftSight: DWG drawings imported without training
Produce
Drawings, assemblies, complex parts, and well-organized files.Drawings
This is for you if: Mixed-media drawings, hand-filled title blocks
Advanced Assemblies
This is for you if: Slow assemblies, constraints that cause breakage, duplicate variants
Advanced Parts
This is for you if: Roughly shaped parts, failed fillets
File Management
This is for you if: Broken references, files renamed outside of SOLIDWORKS
Your profession
Modules specific to what you manufacture.Sheet metal work
This is for you if: Fold patterns created in the workshop, flat patterns redrawn for the laser cutter
Welded construction
This is for you if: Frames designed tube by tube, with hand-drawn cut lists
Surface
This is for you if: Stylized shapes that cannot be rendered in 3D, corrupted STEP imports
Mold Design
This is for you if: Core and mold made in another tool
Pipe Routing
This is for you if: Piping modelled bend by bend
Electrical Routing
This is for you if: Beams measured on the prototype
Electrical diagram
This is for you if: 2D drawings not linked to 3D, manual cross-references
Electrical 3D
This is for you if: Cabinets sized without checking the available space
Advanced Electrical Engineering
This is for you if: Electrical systems to be connected to the ERP; unmanageable libraries
Plastics
This is for you if: Injection molding defects discovered during the first mold trial
Verify by calculation
Resistance, fluids, motion—before the prototype.Simulation
This is for you if: Oversized parts, Simulation never opened
Simulation Professional
This is for you if: Vibrations, buckling, fatigue: structural analysis alone is no longer enough
Nonlinear Simulation
This is for you if: Plasticity, elastomers, large displacements
Dynamic Simulation
This is for you if: Impact and vibration resistance as required by the customer
Flow Simulation
This is for you if: Cooling System Sized Based on Experience
Motion
This is for you if: Motors and actuators selected without knowing the forces
Expert
Automate, refine, communicate.Improvement
This is for you if: Preparing for the CSWP: Covering Everything in One Week
API
This is for you if: Exports and properties entered file by file
Visualize
This is for you if: Images awaiting the prototype or a photographer
Prices exclude tax for your company, for 1 to 3 trainees. Course durations are aligned with the official Dassault Systèmes courses. Is a training course missing from the list? If it’s available in the vendor’s catalogue, we’ll check to see if a trainer is available.
One fee per company, not per intern
It doesn't cost any more to run a training session for two or three people together. Register as many people as need it—up to three. Each training session has a fixed price, listed on its details page: a 14-hour training session costs a total of CA$2,400, excluding tax.
Example: Sheet Metal Work Training
- ✓A training engineer for your group, live
- ✓The publisher's course materials and exercise files
- ✓Pre-test, final assessment
- ✓Certificate of Completion
- ✓Training Program and Agreement
How Does a Training Session Work?
- 01
The need
An engineer will call you, administer the placement test, and confirm the appropriate training program.
- 02
Dates
2-hour time slots scheduled according to your availability, ranging from 2 to 8 hours per day. Starts no earlier than 10 days after the request is made and ends no later than 15 days after.
- 03
The sessions
Remote screen-sharing: demonstration, followed by exercises using the software, with live feedback.
- 04
After
Certificate issued. Once in production, your Ohmycare engineer will take over.
Frequently Asked Questions About SOLIDWORKS Training
How much does SOLIDWORKS training cost?
Each training course has a fixed price for your company, for 1 to 3 trainees: CA$2,400 (excluding tax) for Sheet Metal Work (14 hours), on quote for Simulation (22 hours), and CA$3,770 (excluding tax) for Essentials (28 hours). The price does not change based on the number of participants.
Where can I take an online SOLIDWORKS training course?
At Ohmycad, all training courses are conducted remotely, live with a training engineer, and via screen sharing. You can take the official SOLIDWORKS course from your computer, no matter where you are.
Can I take the course from any country?
Yes. Training sessions are conducted remotely, live, and via screen sharing, whether you’re in Paris, Brussels, Montreal, or elsewhere. On-site sessions are available upon request, with travel expenses in addition.
How are the training sessions organized?
In 2-hour sessions, with up to four sessions per day. Your team can complete 2 hours per day or up to 8 hours, depending on their availability, and the training is completed within 15 days at most to maintain the flow of the course.
Is there a free SOLIDWORKS training course?
Yes to self-paced learning: our 29 free video courses, in French, cover modelling, drafting, sheet metal work, and simulation. For guided, certified training, each course listing shows its fixed price for your company.
How can I get funding for SOLIDWORKS training?
In France, Ohmycad is Qualiopi-certified: your company can apply to its OPCO for funding using our program and quote. Everywhere else, we provide the program, the quote, and the certificate of completion.
How long does it take to learn SOLIDWORKS?
The Essentials course lasts 28 hours, divided into 2-hour sessions over a maximum of 15 days, and teaches you how to work independently on a part, an assembly, and a drawing. This is followed by a few weeks of practice, then job-specific training (sheet metal work, drafting, simulation) depending on what you are designing.
Which SOLIDWORKS training course should I choose to get started?
"Essentials" if you're starting from scratch, or "Refresher" if you've taught yourself. The placement test sent before each training session confirms your appropriate level.
Do the training courses prepare participants for the CSWA and CSWP certifications?
Yes. Essentials covers the CSWA curriculum, and the advanced courses cover the CSWP curriculum. The exams are then taken online through Dassault Systèmes.
Is this the official SOLIDWORKS course?
Yes. Each training course follows the curriculum published by Dassault Systèmes for the specified version, including its duration and the publisher’s course materials. The instructor adds examples drawn from your line of work.
